View MADP-000305-12690R_4602925.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MA4FCP305
Flip Chip PIN Diode RoHS Compliant
Features
* * * * * * * Low Series Resistance : 1.7 Low Capacitance : 50fF Fast Switching Speed : 20nS Silicon Nitride Passivation Polyimide Scratch Protection Designed for Automated Pick and Place Insertion Rugged by Design Rev. V4
1269 Outline
Description
M/A-COM's MA4FCP Series consists of Silicon Flip Chip PIN diodes fabricated with M/A-COM's patented HMIC process. This diode is fabricated on epitaxial wafers using a process designed for repeatable electrical characteristics and extremely low parasitics. This diode is fully passivated with Silicon Nitride and has an additional layer of Polyimide for scratch protection. These protective coatings prevent damage to the junction during automated or manual handling. This flip chip configuration is suitable for pick and place insertion.
Applications
The small 0315 outline and low 0.085 pS RC product, make the device useful for multi-throw switch and switched phase shifter circuits requiring <20nS switching speeds up to 18GHz operating frequency.
Absolute Maximum Ratings
@ TA = +25C (unless otherwise specified)
Parameter Forward Current Reverse Voltage Operating Temperature Storage Temperature Dissipated Power Mounting Temperature Absolute Maximum 100 mA - 40 V - 55C to + 150C - 55C to + 150C 230 mW +300C for 10 seconds
Inches Dim. A B C D E F Min. 0.0269 0.0135 0.0040 0.0041 0.0124 0.0069 Max. 0.0289 0.0155 0.0080 0.0061 0.0144 0.0089
Millimeters Min. Max.
0.683 0.733 0.343 0.393 0.102 0.203 0.105 0.155 0.315 0.365 0.175 0.225
1. Exceeding these limits may cause permanent damage. 1
1. Backside metal: 0.1 M thick. 2. Yellow hatched areas indicate backside ohmic gold contacts.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4FCP305
Flip Chip PIN Diode RoHS Compliant
Electrical Specifications @ + 25 C Parameters @ Conditions
Total Capacitance @ -10V, 1MHz1 Total Capacitance @ -10V, 1GHz1,3 Series Resistance @ +50mA2,3, 100MHz Series Resistance @ +50mA2,3, 1GHz Forward Voltage @ +100mA Reverse Voltage @ -10mA Reverse Current @ -40V 50 - 90 % Lifetime @ + 10mA / - 6mA Steady State Thermal Resistance4 1. 2. 3. 4. Rev. V4
Symbol
CT CT RS RS VF VR IR TL
Units
pF pF V V mA ns C/W
Min.
Typ.
0.060 0.050 1.7 2.1 1.05
Max.
1.25
-40
-50 10 25 640
Total capacitance is equivalent to the sum of junction capacitance Cj and parasitic capacitance, Cp. Series resistance RS is equivalent to the total diode series resistance including the junction resistance Rj. Rs and Cp measured on an HP4291A with die mounted in an ODS-186 package. Steady-state Thermal Resistance measured with die mounted in an ODS-186 package.
ESD
These devices very susceptible to ESD and are rated Class 0 (0-199V) per HBM MIL-STD-883, method 3015.7 [C = 100pF 10%, R = 1.5kW 1%]. Even though tested die pass 100V ESD, they must be handled in a static-free environment.
2
Specifications Subject to Change Without Notice.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA4FCP305
Flip Chip PIN Diode RoHS Compliant
Handling Procedures
All semiconductor chips should be handled with care to avoid damage or contamination from perspiration and skin oils. The use of plastic tipped tweezers or vacuum pickups is strongly recommended for individual components. Bulk handling should insure that abrasion and mechanical shock are minimized. Rev. V4
Bonding Techniques
These devices were designed for insertion onto hard or soft substrates with the junction side down. They can be mounted with electrically conductive epoxy or with a low temperature solder preform. However, Sn rich solders are not recommended due to the tungsten metallization scheme beneath the gold contacts. Indalloy or 80/20, Au/Sn, solders are acceptable. Maximum soldering temperature must be < 300C for < 10 sec. These chips are designed to be inserted onto hard or soft substrates with the junction side down. They should be mounted onto silkscreened circuits using electrically conductive Ag epoxy, approximately 1-2 mils in thickness and cured at approximately 90C to 150C per manufacturer's schedule. For extended cure times, > 30 minutes, temperatures must be below 200 C. The die can also be assembled with the junction side up, and wire or ribbon bonds made to the pads.
Circuit Mounting Dimensions ( Inches ) 0.013"
0.012" (2) PL
0.008" (2) PL
Ordering Information
The MA4FCP305 flip chip diode may be ordered in either waffle packs, tape and reel or 6" rings mounted on tape per the table below. Tape and reel dimensions are provided in Application Note M513 located on the M/A-COM website @ www.macom.com.
Part Number MA4FCP305 MADP-007161-01269T MADP-000305-12690R
3
Packaging Die in Waffle Pack Tape & Reel Wafer on Tape Frame
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.

▲Up To Search▲

Price & Availability of MADP-000305-12690R

	To Download MADP-000305-12690R Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .